4000000b-00000000 IP address of default gateway modified from [arg1] to [arg2] by user [arg3].
Explanation: The specified user has changed the gateway address of the Integrated Management Module external
network interface to the specified value.
May also be shown as 4000000b00000000 or 0x4000000b00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0011
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000000c-00000000 OS Watchdog response [arg1] by [arg2] .
Explanation: This message is for the use case where an OS Watchdog has been enabled or disabled by a user.
May also be shown as 4000000c00000000 or 0x4000000c00000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0012
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
4000000d-00000000 DHCP[[arg1]] failure, no IP address assigned.
Explanation: A DHCP server has failed to assign an IP address to the IMM.
May also be shown as 4000000d00000000 or 0x4000000d00000000
Severity: Warning
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0013
SNMP Trap ID:
Automatically notify Support: No
User response: Complete the following steps until the problem is solved:
1. Make sure that the IMM network cable is connected.
2. Make sure that there is a DHCP server on the network that can assign an IP address to the IMM.
4000000e-00000000 Remote Login Successful. Login ID: [arg1] from [arg2] at IP address [arg3].
Explanation: The specified user has logged in to the Integrated Management Module.
May also be shown as 4000000e00000000 or 0x4000000e00000000
Severity: Info
Alert Category: System - Remote Login
4000000b-00000000 • 4000000e-00000000
72
IBM Flex System x440 Compute Node Types 7917 and 2584: Installation and Service Guide
To Next Page
Loading...
