IBM Flex System x440 Compute Node - Page 87

40000015-00000000 Management Controller [arg1] reset was initiated by user [arg2].
Explanation: The Integrated Management Module has been reset. The logs provide additional details.
May also be shown as 4000001500000000 or 0x4000001500000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0021
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000016-00000000 ENET[[arg1]] DHCP-HSTN=[arg2], DN=[arg3], IP@=[arg4], SN=[arg5], GW@=[arg6],
DNS1@=[arg7] .
Explanation: The DHCP server has assigned an IMM IP address and configuration.
May also be shown as 4000001600000000 or 0x4000001600000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0022
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000017-00000000 ENET[[arg1]] IP-Cfg:HstName=[arg2], IP@=[arg3] ,NetMsk=[arg4], GW@=[arg5] .
Explanation: An IMM IP address and configuration have been assigned using client data.
May also be shown as 4000001700000000 or 0x4000001700000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0023
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
40000018-00000000 LAN: Ethernet[[arg1]] interface is no longer active.
Explanation: The IMM Ethernet interface has been disabled.
May also be shown as 4000001800000000 or 0x4000001800000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0024
40000015-00000000 • 40000018-00000000
Chapter 6. Troubleshooting 75