© Copyright IBM Corp. 2000 51
Appendix D. Error codes
The
NetVista User Guide
and the
Hardware Maintenance Manual
provide complete
lists of error and beep codes.
POST error codes
POST error messages appear when, during startup, POST finds problems with the
hardware or a change in the hardware configuration. POST error messages are 3-,
4-, 5-, 8-, or 12-character alphanumeric messages.
Beep codes
Beep codes are a series of tones in sets of two or three that sound when there are
POST errors. The beep pattern represents numeric values and provide further
information about the location of a potential problem.
To Next Page
Loading...
