IBM Power 780 User Manual

Chapter 4. Continuous availability and manageability 199
PCI bus extended error detection XXXXXXX
PCI bus extended error recovery XXXXMostMostMost
PCI-PCI bridge extended error handling XXXX - - -
Redundant RIO or 12x Channel link XXXXXXX
PCI card hot-swap XXXXXXX
Dynamic SP failover at run time XXXXXXX
Memory sparing with CoD at IPL time XXXXXXX
Clock failover run time or IPL XXXXXXX
Memory availability
64-byte ECC code XXXXXXX
Hardware scrubbing XXXXXXX
CRC XXXXXXX
Chipkill XXXXXXX
L1 instruction and data array protection XXXXXXX
L2/L3 ECC and cache line delete XXXXXXX
Special uncorrectable error handling XXXXXXX
Active Memory Mirroring XXXXXXX
Fault detection and isolation
Platform FFDC diagnostics XXXXXXX
Run-time diagnostics XXXXMostMostMost
Storage Protection Keys - X X X - - -
Dynamic Trace XXXX - - X
Operating System FFDC - X X X - - -
Error log analysis XXXXXXX
Freeze mode of I/O Hub XXXX - - -
Service Processor support for:
򐂰 Built-in self-tests (BIST) for logic and arrays XXXXXXX
򐂰 Wire tests XXXXXXX
򐂰 Component initialization XXXXXXX
Serviceability
Boot-time progress indicators XXXXMostMostMost
Electronic Service Agent Call Home from
management console
XXXXXXX
RAS feature
AIX
5.3
AIX
6.1
AIX
7.1
IBM i RHEL
5.7
RHEL
6.3
SLES
11
SP2

IBM Power 780 Specifications

General

Brand	IBM
Model	Power 780
Category	Server
Language	English