IBM SurePOS 500 User Manual

SurePOS 500 4846-XX5 Technical Reference
Page 58 of 63
This item does not apply to ACPI environments such as Windows.
Default: Disabled
Options:
Disabled
• 1 Min
• 2 Min
• 4 Min
• 8 Min
• 12 Min
• 20 Min
• 30 Min
• 40 Min
• 1 Hour
HDD Power Down
Selects the timeout for powering down the hard disk in APM environments. After the selected amount of inactivity
time, the hard disk will spin down. Hard disk activity will cause the hard disk to spin back up.
This option is only available if “Power Management” is set to “User Define”.
This item does not apply to ACPI environments such as Windows.
Default: Disabled
Options:
• Disabled
• 1 Min
• 2 Min
• 3 Min
• 4 Min
• 5 Min
• 6 Min
• 7 Min
• 8 Min
• 9 Min
• 10 Min
• 11 Min
• 12 Min
• 13 Min
• 14 Min
• 15 Min
Power Button Mode
Selects the power button behavior for non-ACPI environments such as DOS.
Default: Instant-Off
Options:
• Instant-Off
• Suspend/Disabled
State After Power Failure
Specifies the power state of the system after power is lost and then restored.
Default: Last State

IBM SurePOS 500 Specifications

General

Brand	IBM
Model	SurePOS 500
Category	Touch terminals
Language	English