IBM SurePOS 500 User Manual

SurePOS 500 4846-XX5 Technical Reference
Page 59 of 63
Options:
• Last State
• Turn On
• Stay Off
Wake on LAN
If enabled, allows a Magic Packet(TM) sent to the onboard LAN adapter to wake the system from a suspend or off
state.
Default: Enabled
Options:
• Disabled
• Enabled
Wake on Touch
If enabled, allows a touch on the onboard LCD to wake the system from a suspend state.
Default: Enabled
Options:
• Disabled
• Enabled
Wake on Ring
If enabled, allows a modem attached to Serial Port D to wake the system via Ring Indicate. Ports A-C can be
jumpered to tie DSR (pin1) to Ring Indicate if required.
Default: Disabled
Options:
• Disabled
• Enabled
Wake on Alarm
If enabled, the allows the system to wake up at the specified time and date.
Default: Disabled
Options:
• Disabled
• Enabled
Date (of Month) Alarm
If “Wake on Alarm” is enabled, sets the Alarm date using a keyboard or on-screen numpad. Setting the date to zero
specifies that all days are alarm days.
This item is not available if “Wake on Alarm” is disabled.
Time (hh:mm:ss) Alarm
If “Wake on Alarm” is enabled, sets the Alarm time using a keyboard or on-screen numpad.
This item is not available if “Wake on Alarm” is disabled.

IBM SurePOS 500 Specifications

General

Brand	IBM
Model	SurePOS 500
Category	Touch terminals
Language	English