To Next Page

To Previous Page

SurePOS 500 4846-XX5 Technical Reference

Page 60 of 63

6.8 PnP/PCI Configurations

PNP OS Installed

Selects whether the BIOS or the operating system configures certain onboard devices. Select “No” for Windows NT or

“Yes” for all other operating systems.

Default: Yes

Options:

• No

• Yes

Reset Configuration Data

This item is for diagnostic purposes only. Select Enabled to reset the Extended System Configuration Data (ESCD) if

the operating system cannot boot. The option automatically returns to Disabled on the next boot.

Default: Disabled

Options:

• Disabled

• Enabled

Resources Controlled By

BIOS can automatically configure the boot and Plug and Play compatible devices. Select “Auto (ESCD)” to have BIOS

automatically assign the IRQ resources to PCI devices. Select “Manual” to select which IRQs are not available for PCI

device use.

Changing this item is not recommended.

Default: Auto(ESCD)

Options:

• Auto(ESCD)

• Manual

IRQ Resources

Select <Enter> to view the sub-menu.

Questions and Answers:

Need help?

Do you have a question about the IBM SurePOS 500 and is the answer not in the manual?

IBM SurePOS 500 Specifications

General