USB connector
USB embedded
hypervisor flash
device connector
PCI slot 3
error LEDs
Slot 5, PCI Express
Gen2 , low profilex8
PCI riser card
PCI slot 4
error LEDs
PCI slot 5
error LEDs
5. Align the USB flash device with the connector on the x8 low-profile riser-card
assembly and push it into the connector until it is firmly seated.
6. Slide the lockbar toward the riser-card assembly to the locked position until it
is seated firmly.
USB Hypervisor
key
Lockbar
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 112.
96 System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide
To Next Page
Loading...
