Memory tray
handle
RAID
battery
trays
6. Lift the memory tray from the server and set it on a flat surface to avoid
damaging the connector pins on the bottom of the tray.
If you have other devices to install or remove, do so now. Otherwise, go to
“Completing the installation” on page 112.
Removing the DIMM air baffle
To remove the DIMM air baffle, complete the following steps:
1. Read the safety information that begins on page “Safety” on page v and
“Installation guidelines” on page 44.
2. Turn off the server (see “Turning off the server” on page 24) and all attached
peripheral devices. Disconnect all power cords; then, disconnect all external
cables from the server.
3. Remove the top cover (see “Removing the server top cover” on page 46).
4. If any remote RAID adapter batteries are stored in the RAID battery trays on
top of the DIMM air baffle, remove the battery tray and set it aside.
48 System x3690 X5 Types 7147, 7148, 7149, and 7192: Installation and User's Guide
To Next Page
Loading...
