EasyManua.ls Logo

Icom GM600 - PREPARATION; Entering the MMSI Code

Icom GM600
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
4
BASIC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Sending a Distress call
You should send a Distress call if, in
the opinion of the Master, the ship or
a person is in distress and requires
immediate assistance.
Emergency channel (Channel 70) is
automatically selected to send a Distress call.
NOTE:
A distress alert default contains:
- Nature of distress:
Undesignated distress (Simple call)
- Position information:
The latest GPS or manual input position
is held for 23.5 hours, or until turning
OFF the transceiver.
NEVER MAKE A DISTRESS CALL IF
YOUR SHIP OR A PERSON IS NOT
IN AN EMERGENCY.
A DISTRESS CALL SHOULD BE
MADE ONLY WHEN IMMEDIATE
HELP IS NEEDED.
D Simple call
q Conrm no Distress call is being
received.
w Lift up the key cover, then hold down
[DISTRESS] until “Transmitting” is
displayed to send the Distress call.
r When receiving the acknowledgement:
• Alarm sounds.
• The following window is displayed.
t Push any [Alarm Off]
.
y
Push any [Close Call RCVD Window]
.
u Hold down [PTT] to announce your
situation.
i Push [Standby Mode] to return to
the Main screen.
e After sending, the following screen is
displayed.

Other manuals for Icom GM600

Related product manuals