Icom GM600 - Sending an Individual Call

11
4
BASIC OPERATION
New2001
The Individual call function enables
you to transmit a DSC signal to
only a specic coast station or
ship. After transmission, wait for an
acknowledgement from the receiving
station.
You can communicate by voice after
receiving the acknowledgement ‘Able to
comply.’
■ Sending an Individual call
+
Push
Rotate
q Display the COMPOSE NON-DISTRESS
screen.
w Select “Address.”
+
Push
Rotate
When you select “Manual Input,” push
the keypad to manually enter a desired
individual ID.
+
Push
Rotate
+
Push
Rotate
When you select a coast station in step e,
the voice channel is automatically specied
by the coast station. Therefore, skip steps
y and u , and go to step i.
+
Push
Rotate
e Select a desired individual address, or
“Manual Input.”
r Select “Category.”
t Select a desired option.
y Select “Channel.”
u Select a desired voice channel.
+
Push
Rotate
Push