EasyManua.ls Logo

Icom GM600 - 7 Specifications and Options; Specifications; Options

Icom GM600
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
7
SPECIFICATIONS AND OPTIONS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Specications
These specications are described when the GM600 is used with
the PS-310.
All stated specications are subject to change without notice or
obligation.
D General
Frequency coverage: TX 156.025 ~ 161.600 MHz
RX 156.025 ~ 162.000 MHz
156.525 MHz (CH70/DSC)
• Mode:
FM (16K0G3E), DSC (16K0G2B)
Operating temp. range:
–15°C
~
+55°C
Current drain (at 24 V): TX high (25 W) 3.3 A
Maximum audio 2.0 A
Power supply requirement: 12/24 V DC (negative ground)
PS-310 Input voltage: 21.6 ~ 31.2 V (#01)
10.8 ~ 15.6 V (#02)
Frequency error: ±0.5 kHz (–15°C ~ +55°C)
• Antenna impedance: 50 ˘ nominal (Unbalanced)
Dimensions (Projections not included):
GM600:
263 (W) × 110 (H) × 109.4 (D) mm
PS-310:
216 (W) × 79 (H) × 125 (D) mm
Weight (approximately):
GM600: 1.6 kg
PS-310: 930
g
D Transmitter
Output power: 25 W/1 W
Modulation system: Variable reactance frequency
modulation
Max. frequency deviation: ±5.0 kHz
D Receiver
Receive system: Double conversion superheterodyne
• Sensitivity:
FM: –7 dBµ emf (typical) (20 dB SINAD)
DSC (CH70): –7 dBµ emf (typical) (1% BER)
Squelch sensitivity: Less than –2 dBµ
Audio output power: More than 10 W at 10% distortion with an
external speaker (4 ˘ load)
Options
PS-310 dc-dc power supply
Provides stable 12.6 V DC output converted from a DC power source.
Version Input voltage Output voltage
#01 21.6 ~ 31.2 V DC 12.6 V DC
#02 10.8 ~ 15.6 V DC 12.6 V DC
HS-98
handset
Provides clear audio reception in offshore conditions and comes in
handy to listen in privacy on board.

Other manuals for Icom GM600

Related product manuals