Icom GM600 - Basic Operation

12
4
BASIC OPERATION
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Push
i Send an Individual call.
!0 When receiving the acknowledgement:
• Alarm sounds.
• The following window is displayed.
(Example: Able to comply)
!1 Push any [Alarm Off]
.
!2 Push any [Close Call RCVD Window] .
o After sending, the following screen is
displayed.
• See ‘Software key functions’ for details
of the Task mode's software key
functions.
!3 Hold down [PTT] to communicate.
!4 Push [Standby Mode] to return to
the Main screen.
When you receive “ACK (Unable)” in step
!0, skip step !3, and go to step !4.
NOTE:
After receiving the acknowledgement:
• The voice channel specied in step u is
selected.
• A different voice channel is selected if the
station you called cannot use the channel.