Icom GM600 - BASIC OPERATION (Continued); Receiving and Transmitting

New2001
16
6
CONNECTIONS
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
CAUTION: Transmitting without an antenna (y) above
may damage the transceiver.
r D-SUB 25-PIN
Connects to a printer (IBM
®
centronics or compatible) to
print out the received DSC call contents.
t ANTENNA CONNECTOR (to receive on Channel 70)
y ANTENNA CONNECTOR
Connects to a marine VHF antenna with a PL-259
connector.
e EXTERNAL SPEAKER/VDR CONNECTOR
Connects to a voice recorder or an external speaker.
• Lead: Thicker than 0.75 sq mm,
Length: Shorter than 1.5 m are recommended.
CAUTION: After connecting the DC power cable, cover the
connector with a tape, as shown below, to prevent water
seeping into the connection.
SP (+)
SP (–)
NC
NC
VDR* (–)
VDR* (+)
Transceiver’s rear panel view
*VDR: Voyage Data
Recorder
w DC POWER CONNECTOR
Connects the PS-310 with the DC power cable of the PS-
310.
Rubber vulcanizing tape