Icom IC-705 - Page 12

11
REMOTE CONTROL
Cmd� Sub cmd� Data Description
1A* 05 AUDIO > AUDIO SCOPE SET
0239 00/01 Send/read the FFT Scope
Waveform Type setting
(00=Line, 01=Fill)
0240 See p� 20� Send/read the FFT Scope
Waveform Color setting
0241 00/01 Send/read the FFT Scope Waterfall
Display setting
(00=OFF, 01=ON)
0242 See p� 20�
Send/read the Oscilloscope
Waveform Color setting
VOICE
0243 0000 ~ 0255 Send/read the TX LEVEL setting
(
0000=0% ~ 0255=100%)
0244 00/01 VOICE TX SET >
Send/read the Auto Monitor setting
(00=OFF, 01=ON)
0245 01 ~ 15
VOICE TX SET >
Send/read the Repeat Time setting
(01=1sec ~ 15=15sec)
KEYER > KEYER 001
0246 00 ~ 04 Send/read the Number Style setting



0247 01 ~ 08
Send/read the Count Up Trigger setting
(01=M1 ~ 08=M8)
0248 0001 ~ 9999 Send/read Present Number setting
(0001=1 ~ 9999=9999)
KEYER > CW-KEY SET
0249 0000 ~ 0255 Send/read Side Tone Level setting
(
0000=0% ~ 0255=100%)
0250 00/01 Send/read Side Tone Level Limit setting
(00=OFF, 01=ON)
0251 01 ~ 60
Send/read Keyer Repeat Time setting
(01=1sec ~ 60=60sec)
0252 28 ~ 45 Send/read Dot/Dash Ratio setting
( 28=1:1:2�8 ~ 45=1:1:4�5
in 0�1 steps)
0253 00 ~ 03 Send/read Rise Time setting
( 00=2ms, 01=4ms,
02=6ms, 03=8ms)
0254 00/01 Send/read Paddle Polarity setting
(00=Normal, 01=Reverse)
0255 00 ~ 02 Send/read Key Type setting
(00=Straight, 01=Bug, 02=Paddle)
0256 00 ~ 02
Send/read MIC Up/Down Keyer setting
( 00=OFF, 01=ON (UP/DOWN),
02=ON (A/B))
DECODE > RTTY DECODE SET
0257 00 ~ 03 Send/read the FFT Scope Averaging
setting
(00=OFF, 01=2, 02=3, 03=4)
0258 See p� 20� Send/read the FFT Scope
Waveform Color setting
0259 00/01
Send/read the Decode USOS setting
(00=OFF, 01=ON)
Cmd� Sub cmd� Data Description
1A* 05 DECODE > RTTY DECODE SET
0260 00/01 Send/read the Decode New Line
Code setting
(00=CR,LF,CR+LF, 01=CR+LF)
0261 00/01 Send/read the TX USOS setting
(00=OFF, 01=ON)
0262 See p� 20� Send/read the Font Color (Receive)
setting
0263 See p� 20� Send/read the Font Color (Transmit)
setting
DECODE > RTTY DECODE LOG
0264 00/01 Send/read the Decode Log setting
(00=OFF, 01=ON)
0265 00/01 Log Set >
Send/read the File Type setting
(00=Text, 01=HTML)
0266 00/01 Log Set >
Send/read the Time Stamp setting
(00=OFF, 01=ON)
0267 00/01
Log Set >
Send/read the Time Stamp (Time) setting
(00=Local, 01=UTC)
0268 00/01 Log Set >
Send/read the Time Stamp
(Frequency) setting
(00=OFF, 01=ON)
RECORD > Recorder Set
0269 00/01 Send/read the TX REC Audio setting
(00=Direct, 01= Monitor)
0270 00/01 Send/read the RX REC Condition
setting
(00=Always, 01=Squelch Auto)
0271 00/01 Send/read the File Split setting
(00=OFF, 01=ON)
0272 00/01
Send/read the PTT Auto REC setting
(00=OFF, 01=ON)
0273 00 ~ 03 Send/read the PRE-REC for PTT
Auto REC setting
( 00=OFF, 01=5sec,
02=10sec, 03=15sec)
RECORD > Player Set
0274 00 ~ 03 Send/read the Skip Time setting
( 00=3sec, 01=5sec,
02=10sec, 03=30sec)
SCAN > SCAN SET
0275 00/01 Send/read the SCAN Speed setting
(00=Slow, 01=Fast)
0276 00/01
Send/read the SCAN Resume setting
(00=OFF, 01=ON)
0277 00 ~ 10 Send/read the Pause Timer setting
(
00=2sec ~ 09=20sec in 2 seconds,
10=HOLD)
0278 00 ~ 06
Send/read the Resume Timer setting
(00=0sec ~ 05=5sec, 06=HOLD)
0279 00 ~ 04 Send/read the Temporary Skip
Timer setting
( 00=5min, 01=10min, 02=15min,
03=While Scanning,
04=While Powered ON)
Remote control (CI-V) information
D Command table