Icom IC-705 - GPS;D-PRS Message; RIT Frequency Settings; DV TX Data; DV RX Data (Transceive)

25
REMOTE CONTROL
Remote control (CI-V) information
D Command formats
• GPS/D-PRS data (Continued)
Weather
Command: 20 03 0103, 0203
1 ~ 9: Call sign/SSID
(9 ASCII characters (A ~ Z, 0 ~ 9, /, -, space))
, : Symbol (2 ASCII characters (00h ~ EFh))
 ~ : Latitude (dd°mm�mmm format)
 ~ : Longitude (ddd°mm�mmm format)
 ~ : Date (UTC: yyyymmddHHMMSS)
( y: Year, m: Month, d: Day,
H: Hour, M: Minute, S: Second)
, : Wind direction (1 degree steps)
, : Wind speed (0�1 m/s steps)
, : Gust speed (0�1 m/s steps)
 ~ : Temperature (0�1°C steps)
: Temperature (0= + degree, 1= – degree)
, : Rainfall (0�1 mm steps)
, : Rainfall (24 hours) (0�1 mm steps)
, : Rainfall (Midnight) (0�1 mm steps)
, : Humidity (1% steps)
 ~ : Barometric pressure (0�1 hPa steps)
L The item, that is not contained the received data, is filled
with “FF�”
L FF: No signal has been received since the power was
turned ON�
X X X X X X
X X X X
 
X X X X
∙∙∙∙∙∙
 ~ 
X X X X
∙∙∙∙∙∙
 ~ 
X X X X
∙∙∙∙∙∙
 ~ 

 
0 3
X X X X
∙∙∙∙∙∙
1 ~ 9
X X

X X X X
 
X X X X X X
X X

 

X X X X
∙∙∙∙∙∙
 ~ 
X X X X
 
X X X X
 
X X X X
∙∙∙∙∙∙
 ~ 
Data number
• GPS/D-PRS message
Command: 20 0401, 0402
1
~
9 
~

(Variable length)
• • • • • •
X XX X X XX X
1 ~ 9: Call sign/SSID
(9 ASCII characters (A ~ Z, 0 ~ 9, /, -, space))
 ~ : Message
(Up to 43 ASCII characters (00h ~ EFh))
L FF: No signal has been received since the power was
turned ON�
• RIT frequency settings
Command: 21 00
10 Hz: 0
~ 9
100 Hz: 0 ~ 9 1 Hz: 0
~ 9
1 kHz: 0 ~ 9
X X X X X X
00: + (plus)
01: – (minus)
• DV TX data
Command: 22 00
1 ~ 
X X X X
∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙
(Variable length)
1 ~ : TX data (Up to 30 Byte)
L“FA” to “FF” are entered after converted to “FF 0A”
to “FF 0F” automatically� Up to 60 Byte data can be
entered in this case�
• DV RX data (transceive)
Command: 22 0101
1 ~ : RX data (Up to 30 Byte)
L“FA” to “FF” are entered after converted to “FF 0A”
to “FF 0F” automatically� Up to 60 Byte data can be
entered in this case�
• MY position data
Command: 23 00
X X X X
1 ~ 5
X X X X
6 ~ 
X X X X
 ~ 
X X X X
 ~ 
X X X X
 ~ 
X X

X X
∙∙∙∙∙∙∙ ∙∙∙∙∙∙∙
∙∙∙∙∙∙∙ ∙∙∙∙∙∙∙
∙∙∙∙∙∙∙
1 ~ 5: Latitude (dd°mm�mmm format)
6 ~ : Longitude (ddd°mm�mmm format)
 ~ : Altitude (0�1 meter steps)
, : Course (1 degree steps)
 ~ : Speed (0�1 km/h steps)
 ~ : Date (UTC: yyyymmddHHMMSS)
( y: Year, m: Month, d: Day,
H: Hour, M: Minute, S: Second)