6
50
MEMORY OPERATION
■ Memory channels
The transceiver has 101 memory channels.The mem-
ory mode is very useful for quickly changing to often-
used frequencies.
All 101 memory channels are tuneable which means
the programmed frequency can be tuned temporarily
with the tuning dial, etc. in memory mode.
■ Memory channel selection
MEMORY
CHANNEL
MEMORY
CHANNEL
NUMBER
CAPABILITY
TRANSFER
TO VFO
OVER-
WRITING
CLEAR
Regular memory
channels
1–99
One frequency and one mode in
each memory channel.
Ye s Ye s Ye s
No
Scan edge
memory
channels
P1, P2
One frequency and one mode in
each memory channel as scan
edges for programmed scan.
Ye s Ye s
•Using the [
YY
] or [
ZZ
] keys
q Push [VFO/MEMO] to select memory mode.
w Push [Y]/[Z] several times to select the desired
memory channel.
•Push and hold [Y]/[Z] for continuous selection.
•[UP] and [DN] on the microphone can also be used.
e To return to VFO mode, push [VFO/MEMO] again.
•Using the keypad
q Push [VFO/MEMO] to select memory mode.
w Push [F-INP].
e Push the desired memory channel number using
the keypad.
•Enter 100 or 101 to select scan edge channel P1 or P2,
respectively.
r Push [Y] or [Z] to select the desired memory
channel.
ANT
1
METER
Po
SFT
0
FIL2
CW
qw:pp
TX
USB
qr≥qot≥pp
14.100.00
BPF
1
VFO
BW
500
ANT
1
METER
Po
SFT
0
FIL2
USB
qw:pp
TX
CW
qr≥qpp≥pp
14.195.00
VFO
1
BW
2.4k
ANT
1
METER
Po
SFT
0
FIL2
USB
qw:pp
TX
wr≥oyp≥pp
12
BW
2.4k
CW
14.195.00
VFO
VFO/
MEMO
or
F-INP
ENT
ANT
1
METER
Po
SFT
0
FIL2
USB
qw:pp
TX
CW
qr≥qpp≥pp
14.195.00
VFO
1
BW
2.4k
ANT
1
METER
Po
SFT
0
FIL2
USB
TX
CW
≥qpp≥qw
14.195.00
VFO
1
BW
2.4k
ANT
1
METER
Po
SFT
0
FIL2
USB
qw:pp
TX
wr≥oyp≥pp
12
BW
2.4k
CW
14.195.00
VFO
F-in
P
1
2
or
then
To Next Page
Loading...
