Icom IC-756PRO - 8-2 DISPLAY BOARD

65
9
SET MODE
■ Level set mode
SSB Tx Tone (Bass)
This item adjusts the bass level of the transmit audio
tone in SSB mode from –5 dB to +5 dB in 1 dB steps.
0dB
0 dB (default)
SSB Tx Tone (Treble)
This item adjusts the treble level of the transmit audio
tone in SSB mode from –5 dB to +5 dB in 1 dB steps.
0dB
0 dB (default)
Monitor Level
This item adjusts the transmit IF signal monitor level
from 0 % to 100 % in 1 % steps.
See p. 35 for details.
 50%
50 % (default)
Side Tone Level
This item adjusts the CW side tone level from 0 % to
100 % in 1 % steps.
See p. 35 for details.
 50%
50 % (default)
Beep Level
This item adjusts the volume level for confirmation
beep tones from 0 % to 100 % in 1 % steps. When
beep tones are turned OFF, this setting has no effect.
 50%
50 % (default)
Beep Level Limit
This item allows you to set a maximum volume level
for confirmation beep tones. Confirmation beep tones
are linked to the [AF] control until a specified volume
level is reached—further rotation of the [AF] control
will not increase the volume of the beep tones.
OONN
Beep level is limited with
[AF] (default)
OOFFFF
Beep level is linked to [AF]
Side Tone Level Limit
This item allows you to set a maximum volume level
for CW side tones. CW side tones are linked to the
[AF] control until a specified volume level is reached
—further rotation of the [AF] control will not increase
the volume of the CW side tones.
OONN
CW side tone level is limited
with [AF] (default)
OOFFFF
CW side tone level is linked
to [AF]