Icom IC-756PRO - Display Set Mode

66
9
SET MODE
■ Display set mode
To adjust the LCD contrast or backlight, wait until the
LCD becomes stable (10 min. or more after turning
power ON). This is an inherent characteristic of
LCDs and LCD backlights and does not indicate a
transceiver malfunction.
Contrast (LCD)
This item adjusts the contrast of the LCD from 0 % to
100 % in 1 % steps.
 60%
60 % (default)
Backlight (LCD)
This item adjusts the brightness of the LCD from 0 %
to 100 % in 1 % steps.
 50%
50 % (default)
Horizon
This item adjusts the horizontal position of the LCD
from 1 to 8.
 4
Horizontal position is 4. (default)
Backlight (switches)
This item adjusts the brightness of the switches from
1 to 8.
 8
Backlight level is 8. (Maximum; default)
Display Type
This item sets the LCD screen type. There are 4 se-
lectable types: A, B, C and D.
AA
A-type LCD screen (default)
Display Font
This item sets the font of the frequency readouts.
There are 7 selectable fonts: Basic 1, Basic 2, Pop,
7seg (7 segment numeral), Italic 1, Italic 2 and Clas-
sic.
BBaassiicc11
Basic 1 font (default)
Memory Name
This item sets the memory name indication ON and
OFF.
See p. 54 for details.
OONN
Memory name is displayed.
(default)
OOFFFF
Memory name is not dis-
played.