Icom IC-E2820 - Frequency Synthesizer and Power Supply; Frequency Synthesizer and PLL

V
QUICK REFERENCE GUIDE
D Controller’s attachment
You can attach the controller of the IC-E2820 by one of 2
methods.
•Example 1
•Example 2
D Remote installation
The supplied remote controller bracket is used for remote in-
stallation.
• Attach the remote controller
bracket onto a flat surface
using with 4 self-tapping
screws
(2.6 mm(d)), or double-
sticky tape, etc., as at left,
then attach remote controller
to the bracket.
When installing into your vehicle
qAttach the supplied remote controller bracket as below.
Remote controller
bracket
Remote
controller
These screws
are not supplied.
Remote controller bracket