EasyManua.ls Logo

Icom IC-E2820 - 17 Specifications and Options; Specifications

Icom IC-E2820
164 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
132
17
SPECIFICATIONS AND OPTIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Specifications
DD
GENERAL
• Frequency coverage : (unit: MHz)
*
1
Guaranteed: 144–146 MHz range only.; *
2
Guaranteed: 430–440 MHz; *
3
Not guaranteed
•Type of emission : FM, AM (Receive only),
DV
(optional UT-123 is required)
• Number of memory channels : 522 (incl. 20 scan edges and 2 calls)
• Frequency resolution : 5, 6.25, 10, 12.5, 15, 20, 25, 30, 50 kHz
• Operating temperature range : –10°C to +60°C
•Frequency stability : ±2.5 ppm
(–10°C to +60°C)
• Power supply requirement : 13.8 V DC ±15%
• Current drain
(at 13.8 V DC: approx.):
Transmit at 50 W 13 A
Receive standby 1.2 A
(simultaneous receive) max. audio 1.8 A
• Antenna connector : SO-239
(50 Ω)
×2 (Tx/Rx and Diversity)
• Dimensions
(proj. not included) :
Main Unit 150(W) × 40(H) × 187.7(D) mm
Remote controller 150(W) × 58(H) × 31.5(D) mm
•Weight
(approx.) :
Main unit 1.5 kg
Remote controller 210 g
(incl. separation cable)
DD
TRANSMITTER
• Modulation system : Variable reactance frequency modulation
• Output power : 50/15/5 W
(approx.)
• Max. frequency deviation : ±5.0 kHz (wide)
±2.5 kHz (narrow)
• Spurious emissions : Less than –60 dB
• Microphone connector : 8-pin modular
(600 Ω)
DD
RECEIVER
• Receive system : Double-conversion superheterodyne
• Intermediate frequencies :
Left band 1st: 38.85 MHz, 2nd: 450 kHz
Right band 1st: 46.35 MHz, 2nd: 450 kHz
• Sensitivity
(amateur bands only)
:
FM (12 dB SINAD)
Less than 0.18 µV
DV (BER 1%) Less than 0.35 µV
(optional UT-123 is required)
• Squelch sensitivity
†
(threshold) : Less than 0.13 µV
• Selectivity
†
(typical) :
Wide More than 10 kHz/6 dB
Less than 30 kHz/60 dB
Narrow More than 6 kHz/6 dB
Less than 20 kHz/60 dB
DV
(optional UT-123 is required) More than 50 dB
• Spurious and image rejection
†
: More than 60 dB
*More than 55 dB for UHF on left band.
•
AF output power
†
(at 13.8 V DC)
: More than 2.4 W at 10% distortion with an
8 Ω load
• Ext. speaker connectors : 3-conductor 3.5 (d) mm/8 Ω
†
Guaranteed 144–146 MHz and 430–440 MHz ranges only.
All stated specifications are subject to change without notice or obligation.
Version Left Band Right Band
Rx: 118–549.995*
1,
*
2
Rx: 118–173.995*
1
, 375–549.995*
2
,
Europe1
Tx: 144–146, 430–440
810–999.99
*
3
Tx: 144–146, 430–440
Europe2 Tx/Rx: 144–146, 430–440

Table of Contents

Icom IC-E2820 - 17 Specifications and Options; Specifications