Icom IC-E2820 - HM-133 Microphone Accessory; HM-133 Electrical and Mechanical Parts; HM-133 Dimensions and Voltage

32
4
REPEATER OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
■ Subaudible tones (Encoder function)
D Subaudible tones
qSelect the main band, mode/channel you wish to set the
subaudible tones to, such as VFO mode or memory/call
channel.
wPush [F•]to display the function guide.
ePush [MENU](V/MHz•SCAN)
(Right band’s) to enter MENU
screen.
rRotate [DIAL] to select “DUP/TONE…” then push
[MAIN•BAND].
tRotate [DIAL] to select “REPEATER TONE” then push
[MAIN•BAND].
yRotate [DIAL] to select and set the desired subaudible fre-
quency, then push [MAIN•BAND].
uPush [BACK](V/MHz•SCAN)
(Right band’s) twice to exit
DUP/TONE set mode.
NOTE: The subaudible tone encoder frequency can be set
in a memory/call channel temporarily. However, the set fre-
quency is cleared once another memory channel or VFO
mode is selected. To store the tone frequency permanently,
overwrite the channel information.
z Set the main band, mode/channel you wish to
set the subaudible tones for, such as VFO mode
or memory/call channel.
•The subaudible tone frequency is independently pro-
grammed into each mode or channel.
x Push [ SET B(D-OFF)] to enter MENU screen.
c Push [Y] or [Z] to select “DUP/TONE…” then
push [
SET B(D-OFF)].
v Push [Y] or [Z] to select “REPEATER TONE”
then push [
SET
B(D-OFF)].
b Push [Y] or [Z] to select the desired
subaudible
tone frequency
then push [ SET B(D-OFF)].
n Push [
CLR A(MW)] to return VFO mode.
• Subaudible tone frequency list
(unit: Hz)
67.0
69.3
71.9
74.4
77.0
79.7
82.5
85.4
88.5
91.5
94.8
97.4
100.0
103.5
107.2
110.9
114.8
118.8
123.0
127.3
131.8
136.5
141.3
146.2
151.4
156.7
159.8
162.2
165.5
167.9
171.3
173.8
177.3
179.9
183.5
186.2
189.9
192.8
196.6
199.5
203.5
206.5
210.7
218.1
225.7
229.1
233.6
241.8
250.3
254.1
Push
SET
B
[MENU]
[F• ]
[DIAL]
[MAIN•BAND]