121
GPS/GPS-A OPERATION
15
■ GPS operation
A GPS receiver is built-in to the optional UT-123. When UT-
123 is installed, GPS operation that indicate the current posi-
tion (Latitude and Longitude) and time is available. The
position data can also be transmitted with a message to an-
other station.
DD
GPS function
qWhile in DV mode operation, push [F•]to display the
function guide.
wPush [MENU](V/MHz•SCAN)
(Right band’s) to enter MENU
screen.
eRotate [DIAL] to select “SET MODE,” then push
[MAIN•BAND] to enter set mode.
rRotate [DIAL] to select “GPS” then push [MAIN•BAND].
tRotate [DIAL] to turn the GPS function ON and OFF, then
push [MAIN•BAND]
• Select “OFF” to deactivate the GPS function.
To Next Page
Loading...
