Icom IC-E2820 - Copying Memory Contents

67
6
MEMORY MODE OPERATION
■ Copying memory contents
This function copies a memory channel’s contents to VFO (or
another memory/call channel). This is useful when searching for
signals around a memory channel frequency and for recall-
ing the offset frequency, subaudible tone frequency etc.
D Memory/call➪VFO
qSelect the desired band’s (left or right) memory or call chan-
nel.
➥ Push the desired band’s [M/CALL•MW] several times to
select memory mode or call channel, then rotate the
same band’s [DIAL] to select the desired memory or call
channel.
wPush and hold [M/CALL•MW] for 2 sec. to copy the se-
lected memory/call channel contents to the VFO.
• VFO mode is selected automatically.
z Push [BAND] to select the desired band as
the main band, if necessary.
x Select the memory/call channel to be copied.
➥ Push [MR/CALL] to select memory mode,
then select the desired memory channel
via [Y]/[Z] or keypad.
➥ Push and hold [MR/CALL] for 1 sec. then
push [Y]/[Z] to select the call channel.
c Push [FUNC], then push and hold
[
CLR A(MW)] for 1 sec. to copy the selected
memory/call channel contents to the VFO.
• VFO mode is selected automatically.
MR/CALL
MW
Y/Z
[EXAMPLE]: Copying memory channel 30 contents to VFO.
Push to select memory mode.
Front panel operation:
HM-133 operation:
Push to select memory mode.
Rotate for selecting memory channel.
Select memory channel.
Push and hold (same band’s) for 1 sec.
Push then push and hold for 1 sec.
M/CALL
MW
M/CALL
MW
M
A
I
N
B
A
N
D