Icom IC-E2820 - Page 80

59
5
DV MODE OPERATION (Optional UT-123 is required)
◆ Track size setting
The track size can be changed with the following instruction.
qPush [F•]to display the function guide.
wPush [MENU](V/MHz•SCAN)
(Right band’s)
to display the
MENU screen.
eRotate [DIAL] to select “DV VOICE MEMO” then push
[MAIN•BAND].
rRotate [DIAL] to select “TRACK SIZE” then push
[MAIN•BAND].
tRotate [DIAL] to select the desired track size.
10SEC/3TRACK : Makes 3 tracks and 10 seconds audio
can be recorded in each track.
15SEC/2TRACK : Makes 2 tracks and 15 seconds audio
can be recorded in each track.
(default)
30SEC/1TRACK : Makes 1 track only and 30 seconds
audio can be recorded in a track.
yPush [MAIN•BAND] to set the track size.
uPush [BACK](V/MHz•SCAN)
(Right band’s) twice to exit
from DV voice memo screen.
◆ Playing-back and erasing the recorded audio
qPush [F•]twice to display the function guide 2.
wPush [REC](M/CALL•MW)
(Right band’s) to enter REC track
screen.
eRotate [DIAL] to select the desired audio track to be
played back or erased.
•“✱” is displayed beside the track number when the selected track
has been recorded.
rPush [≈](LOW•PRIO) to play-back the recorded audio.
• Push [||](LOW•PRIO) to pause, push [■](TONE•DTMF) to stop
play-back.
tPush [CLR](DUP•MONI) to erase the recorded audio.
yPush [BACK](V/MHz•SCAN)
(Right band’s) to return to
frequency indication.