38
4
APCO P25 MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
t Push [PTT] to transmit the radio inhibit signal to the target
station.
• The LED indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• “PLEASE WAIT” is displayed.
y Release [PTT].
• “ACK RECEIVED” is displayed after receiving an acknowledge-
ment from the target station, and then the transceiver returns to
normal operation.
• “NO ACKNOWLDG” is displayed when an acknowledgement is
not received, and then transceiver returns to normal operation.
D Receiving
If a radio inhibit signal is received that matches your Individ-
ual ID, you cannot receive or transmit afterwards. (Depending
on the presetting.)
q When a radio inhibit signal is received;
• The LED indicator
(for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• “SORRY” appears.
(Simple and 10-key types only)
For Handhelds: For Mobiles:
SORRY
SORRY
w An acknowledgement is automatically transmitted.
•
The
LED
indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) does not light because the radio inhibit is activated.
NOTE: The transceiver will not be revived until one of fol-
lowing operations is performed. (Depending on the preset-
ting.)
• Receiving a radio uninhibit signal.
• Inputting the user passcode.
When the decode action is set to “Kill,” the cloning opera-
tion is necessary to revive.
To Next Page
Loading...
Need help?
General
