53
4
APCO P25 MODE OPERATION
n Announcement function
D Transmitting
The Announcement function allows you to send an an-
nouncement signal to only a specific group, and only in the
Trunking mode.
The members of the target group can only receive, and not
transmit, announcements.
[Digital Button] key assignment is necessary to use the An-
nouncement function.
Not available on Non-display types.
q Push [Digital Button] to enter the digital call type selec-
tion mode.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select “ANNOUNCEMENT.”
For Handhelds: For Mobiles:
ANNOUNCEMENT
DSEL PAGE STAT
ANNOUNCEMENT
e Hold down [PTT] to transmit the announcement signal to
the target group.
• The LED indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
r Hold down [PTT] and speak into the microphone.
t Release [PTT] to stop transmitting.
D Receiving
Not available on Non-display types.
q When a matched announcement signal is received;
• The LED indicator
(for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• “ANNOUNCEMENT” and calling station ID (or name) are dis-
played for 2 seconds.
For Handhelds: For Mobiles:
ANNOUNCEMENT
INDIVIDUAL1
ANNOUNCEMENT
INDIVIDUAL1
DSEL PAGE STAT
The calling station name (or ID)
w You can listen to the announcement.
To Next Page
Loading...
Need help?
General
