47
4
APCO P25 MODE OPERATION
n Short Message
D Transmitting
The transceiver can send one of up to 10 different preset
Short Messages.
[Digital Button] or [Digital Message] key assignment is
necessary to transmit the Short Message.
Not available on Non-display types.
✔ For Trunking mode operation:
The Short Message can be sent only to a dispatcher in the
Trunking mode.
q Push [Digital Button] to enter the digital call type selec-
tion mode.
✔ Quick access
Push [Digital Message] to directly enter the Short Mes-
sage selection mode. In this case, skip steps w and e.
Go to step r.
w Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select “SHORT MSG.”
For Handhelds: For Mobiles:
SHORT MSG
DSEL PAGE STAT
SHORTMSG
e Push [Digital Button] again to enter the Short Message
selection mode.
• A preset Short Message is displayed.
For Handhelds: For Mobiles:
SHORT MSG
HELLO
DSEL PAGE STAT
SHORTMSG
HELLO
r Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select a desired Short Message.
While in the Trunking mode, the following steps t and y
are not necessary. Go to step u.
t Push [Digital Button] (or [Digital Message]) again to
enter the Individual ID selection mode.
• A preset ID name is displayed.
•
When the ID name is not programmed, the ID code is displayed.
For Handhelds: For Mobiles:
SHORT MSG
INDIVIDUAL1
DSEL PAGE STAT
SHORTMSG
INDIVIDUAL1
To Next Page
Loading...
Need help?
General
