24
3
n Man Down Emergency Call
(Handheld transceivers only)
This function requires the optional UT-124R man down unit.
When the transceiver has been left in a horizontal position for
the preset time period, the transceiver enters the emergency
mode, and then the countdown starts.
After the preset time period has passed, an emergency call
is automatically transmitted once, or repeatedly
, depending
on the presetting.
If the transceiver is placed in a vertical position before the
first transmission, the transceiver exits the emergency mode
and the emergency call is canceled.
n Status message transmission
The status message can be transmitted automatically when;
• The transceiver is turned ON.
- Set a status message to transmit in the ‘Power ON Status’ item.
• After sending an Emergency call by the Man Down function.
(Available on Handheld transceivers only)
- Set a status message to transmit in the ‘Man Down Status Send’
item.
MDC 1200 SYSTEM OPERATION
3
1
2
4
5
6
7
8
9
10
11
12
13
14
15
16
To Next Page
Loading...
Need help?
General
