48
4
APCO P25 MODE OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
y Push [CH Up] or [CH Down], or rotate [CH Up/Down] to
select a desired ID (or name).
• Hold down [Digital Button] (or [Digital Message]) for 1 second
to cancel and return to normal operation.
• The ID can be edited with the 10-keypad, depending on the
presetting. (10-key types only) See page 32 for editing details.
u Push [PTT] to transmit the Short Message to the target
station.
• The LED indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
• “PLEASE WAIT” is displayed.
i Release [PTT].
• “ACK RECEIVED” is displayed after receiving an acknowledge-
ment from the target station, and then the transceiver returns to
normal operation.
• “NO ACKNOWLDG” is displayed when an acknowledgement is
not received, and then transceiver returns to normal operation.
D Receiving
Not available on Non-display types.
q When a Short Message is received;
• The LED indicator
(for Handhelds) or Busy indicator (for Mobiles)
lights green.
• Ringers sound.
• The calling station ID name (or code) and the Short Message
blink.
• “ ” blinks. (for Mobiles)
For Handhelds: For Mobiles:
w An acknowledgement is automatically transmitted.
• The LED indicator
(for Handhelds) or Transmit indicator (for Mo-
biles) lights red.
e Push any key (except for [ ]) to stop the display from
blinking and return to normal operation.
HELLO
INDIVIDUAL1
DSEL PAGE STAT
HELLO
INDIVIDUAL1
The received message
The calling station ID name
To Next Page
Loading...
Need help?
General
