Icom IC-M323 - Selecting the Channel group

10
4
BASIC OPERATION
New2001
■ Selecting a Channel (Continued)
Selecting the D Channel group
There are preset international channels in the IC-M323/IC-
M323G/IC-M324/IC-M324G. Except for the European ver-
sions, you can select a channel group suitable for your oper-
ating area, as described below.
Push [MENU]. q
Rotate Dial or push [ w ∫]/[√] to select “Radio Settings,” and
then push [ENT].
Rotate Dial or push [ e ∫]/[√] to select “CHAN Group,” and
then push [ENT].
Rotate Dial or push [ r ∫]/[√] to select the desired channel
group, and then push [ENT].
 •U.S.A.,(USA)International(INT),CAN(Canada),ATISorDSC
channel groups may be selected, depending on the transceiver
version.
 •Push[BACK]toreturntothepreviousscreen.
Push [EXIT] to exit the Menu screen. t
Push [ y Y]/[Z] to select a channel.
 •Pushing[Y]/[Z] on the microphone selects only Favorite chan-
nels.
 •“DUP”isdisplayedwhenaduplexchannelisselected.
 •“A”isdisplayedwhenasimplexchannelisselected.
When the U.S.A. channel
group is selected.
Channel group icon is displayed