74
8
MENU SCREEN OPERATION
New2001
■ Configuration items (Continued)
NMEA Output D
Select the Data Output function option for a NMEA output
port.
• POS data output (Default: OFF)
When receiving position data from an external or the built-in
GPS receiver,* this function sends the data from the NMEA
Output port to an external device.
*For only IC-M323G and IC-M324G.
• DSC data output (Default: OFF)
When receiving a DSC call, this function makes the trans-
ceiver send the DSC data from its NMEA Output port to an
external device.
All Stations: Outputs the call from any vessel from the
NMEA Output port.
Station List: Outputs the call from any vessels listed on
the Individual ID screen.
OFF: Does not output any call to an external de-
vice.
D Remote ID (Default: 15)
Set a Remote ID number to between 1 and 69.
The Remote ID is included in the sentence of the Icom origi-
nal NMEA format.
To Next Page
Loading...
