36
7
DSC OPERATION
New2001
■ Making DSC calls
Making a Position Request call (continued) D
Push [CALL] to transmit the Position Request Call. r
•IfChannel70isbusy,thetransceiverstandsbyuntilthechannel
becomes clear.
After the Position Request Call has been transmitted, the t
following screen is displayed.
When the acknowledgement call is received, alarm sounds y
and the following screen is displayed.
Push [ALARM OFF] to stop the alarm, and then the screen u
as shown below is displayed.
Push [EXIT] to return to the normal operating mode. i
To Next Page
Loading...
