Icom IC-M330GE

35
DSC OPERATION
7
New2001
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ACPT
(Accept)
• Accepts the call.
• The assigned channel is selected.
• The call is saved in the DSC Log.
STBY
:ClosestheAllShipscall,andthenreturnstothe
operating screen.
INFO
:Thereceivedcall’sinformationisdisplayed.
D Receiving an All Ships call
When an All Ships call is received:
• The alarm sounds.
• “RCVD ALL SHIPS” is displayed.
1. Push
ALARM OFF
to turn OFF the alarm.
L Thetrafcchannelthatisassignedbythecalleris
automatically selected after 10 seconds by default.
2. Pushthesoftwarekeybelowyournextoperation.
IGN
(Ignore)
• Ignores the call and returns to the operating screen.
• The call is saved in the DSC Log.
• “
” blinks continuously until you display the call
message.
PAUSE
(Pause)
L
PAUSE
is not displayed if the “CH Auto SW” item is set to
“Manual.” (p.42)
• Pausesthecountdownuntiltheassignedchannelis
automatically selected.
• Select
RESUME
toresumethecountdown.
• The call is saved in the DSC Log.