Icom IC-M330GE

38
7
DSC OPERATION
New2001
D Receiving a Test Acknowledgement call
AftersendingaTestcall,thecalledstationwillsendyoua
TestAcknowledgementcall.
1. Push
ALARM OFF
to turn OFF the alarm.
2. Push
CLOSE
.
• Thereceivedcall’sinformationisdisplayed.
• The call is saved in the DSC Log.
3. Push
STBY
to return to the operating screen.
When a Test Acknowledgement call is received:
• The alarm sounds for 2 minutes.
• “RCVD TEST ACK” is displayed.
■ DSC Log
D Received DSC Log
The transceiver saves up to 30 received Distress call
messages and 50 received “Others” call messages in your
DSC Log.
On the operating screen, “
”isdisplayedwhenthereisan
unreadcallmessage.Theiconblinkswhenthereisanew
received call message.
1. Display the “DSC Log” screen.
Menu > DSC Log
2. Push[▲]or[▼]toselect“ReceivedCallLog,”andthen
push [ENT].
• The“RCVDCALLLOG”screenisdisplayed.
3. Push[▲]or[▼]toselect“Distress”
or “Others,” and then push [ENT].
L “Distress” displays the received
Distress call log, and “Others”
displays the received DSC call log.
TIP: You can also display the “Received” screen by
pushing
LOG
on the operating screen.