19
7
SET MODE
7
D Auto scan function “AS”
The auto scan function starts the desired scan automatically
when no signal is received, and no operation is performed for
30 sec.
D Dual/Tri-watch function “dt”
This item selects dual or tri-watch as desired. See p. 16 for
details.
D Monitor key action “Sq”
The monitor key opens the squelch temporarily. This key ac-
tion contains PUSH (Pu) or HOLD (Ho) settings as shown
below.
• Pu (PUSH): After pushing [MONI] (SQL) for 1 sec., the squelch opens
and emits audio. The squelch is held open while contin-
uously pushing and holding [MONI] (SQL). (default)
• Ho (HOLD): After pushing [MONI] (SQL) for 1 sec., the squelch
opens and emits audio even while [MONI] (SQL) is re-
leased. To close the squelch, push any key.
D Automatic Backlighting “bL”
This function is convenient for nighttime operation. The back-
light can be selected from ON and OFF.
• The backlight is automatically activated when any key except for
[PTT] is pushed.
• The backlight is automatically turned OFF after 5 sec. of inactivity.
To Next Page
Loading...
