28
SPECIFICATIONS
12
ï GENERAL
• Frequency coverage : Transmit 156.025–157.425 MHz
Receive 156.050–163.275 MHz
• Mode : FM (16K0G3E)
• Channel spacing : 25 kHz
• Power supply requirement : BP-251 and BP-252 only
• Current drain (at 7.4 V DC) : TX High (5 W) 1.5 A
TX Low (1 W) 0.7 A
Max. audio 0.2 A
Power save 20 mA typical
• Frequency stability : ±10 ppm (–20°C to +60°C)
• Useable temperature range : –20°C to +60°C; –4°F to +140°F
• Dimensions : 62 (W) × 141.5(H) × 43(D) mm
(Projections not included) 2
7
⁄16(W) × 5
9
⁄16(H) × 1
11
⁄16(D) inch
• Weight : Approx. 305 g (10.7 oz)
(with BP-252, FA-SC58V and MB-109)
ï TRANSMITTER
• Output power (at 7.4 V DC) : 5 W (High) and 1 W (Low)
• Modulation system : Variable reactance frequency
modulation
• Max. frequency deviation : ±5 kHz
• Adjacent channel power : 70 dB
• Spurious emissions : –68 dBc typical
ï RECEIVER
• Receive system : Double-conversion
superheterodyne
• Sensitivity (12 dB SINAD) : 0.25 µV typical
• Squelch sensitivity : 0.35 µV typical (at threshold)
• Intermodulation rejection ratio : 70 dB typical
• Spurious response rejection ratio : 70 dB typical
• Adjacent channel selectivity : 70 dB typical
• Audio output power : 0.35 W typical at 10% distortion
with an 8 Ω load
All stated specifications are subject to change without notice or
obligation.
To Next Page
