Icom IC-M37

4
3
PANEL DESCRIPTION
1SPEAKER/MIC JACK [SP/MIC]
(p. 23)
Connect the optional HM-213 speaker
microphone here.
2PTT SWITCH [PTT]
Hold down to transmit, release to
receive.
3CHANNEL 16/CALL CHANNEL KEY
[16/C] (p. 9)
• Push to select Channel 16.
• Hold down for 1 second to select the
Call channel.
4VOLUME/SQUELCH/MONITOR KEY
[VOL/SQL]/[MONI]
• Push once to display the volume level
setting screen.
• Push twice to display the squelch level
setting screen. (p. 12)
• Hold down for 1 second to turn ON the
monitor function.
5SCAN/DUAL KEY [SCAN]/[DUAL]
• Push to start or stop a scan. (p. 15)
• Hold down for 1 second to start the
Dual/Tri-watch mode. (p. 16)
L While in Dualwatch, push to cancel
Dualwatch.
L Tri-watch may start, depending on the
Set mode settings.
• Hold down both [SCAN] and [Hi/Lo] for
1 second to turn ON the AquaQuake
function. (p. 12)
6POWER KEY [
]
Hold down for 1 second to turn the
transceiver ON or OFF.
7TRANSMIT POWER/LOCK KEY
[Hi/Lo]/[
]
• Push to set the power level to High or
Low.
L Some channels are set to only Low
power.
• Hold down for 1 second to lock or
unlock the keypad.
8CHANNEL/WEATHER CHANNEL*
1
KEY [CH/WX]/[U/I/C] or [CH]
• Push to switch between a regular
channel and weather channel.*
1
(p. 10)
• Push to select a regular channel.*
2
• Hold down for 1 second to change the
channel group. (p. 9)
NOTE: [CH] is described as [CH/WX]
or [U/I/C] in this instruction manual.
9FAVORITE CHANNEL KEY [FAV] (p. 15)
• Push to select a Favorite channel.
• Hold down for 1 second to set or clear the
selected channel as a Favorite channel.
UP/DOWN KEYS [▲]/[▼]
• Push to select the operating channel.
• Push to change the volume/squelch
level while adjusting.
• In the Set mode, push to select an
item option.
ANTENNA CONNECTOR (p. 2)
Connect the supplied antenna here.
*
1
For the USA, EXP, and AUS versions
*
2
For the EUR, FRG, HOL, and UK versions
■ Front, top and side panels
1
2
3
4
5

Function
display

9
8
7
6
Speaker
Microphone