To Next Page

To Previous Page

Page 5

BASIC OPERATION

The ICS NAV6 is a flexible & powerful tool for receiving, storing & viewing

NAVTEX messages. To assist you in getting the best from your ICS NAV6

equipment, read this section which contains short cuts to the most commonly

used NAVTEX operations. Read the rest of the manual for a comprehensive guide

to the ICS NAV6 range.

First, find your way around the keypad and the display.

Centre keys are a ‘navigation pad’ ( UP DOWN LEFT RIGHT ).

Softkeys are situated on either side of the navigation pad. The current

function is shown on the soft-key menu area at the bottom of the LCD.

The MODE softkey switches between the three operating ‘modes’

(NAVTEX, Navigate & Setup).

The VIEW softkey switches between ‘views’ in each operating ‘mode’. If

a ‘view’ has several ‘pages’ associated with it then these are selected

with the page softkey.

Operate the keys in this order to get to the mode that you want:

MODE → VIEW → PAGE → FUNCTION

Softkeys are context sensitive and cyclical in operation; several button presses

will return you to the start of the cycle. As the button is pressed, the softkey labels

change to show the current functions of the keys.

navigation pad

FUNCTION PAGE VIEW MODE

The Keypad

softkeys

Other manuals for ICS Nav6

Questions and Answers:

Need help?

Do you have a question about the ICS Nav6 and is the answer not in the manual?

Power

Operating Environment

operating temperature range	0 to +40°C
storage temperature range	-20 to +55°C
humidity	0 to 95%

Weight and Dimensions