IDEAL LOGIC Combi 24 User Manual

3
Ideal Logic Combi - Installation and Servicing
DOCUMENT AMENDMENTS
Relevant Installation changes implemented in this book from Mod Level .......... A11 (Jul 13) to A12 (Oct 13)
Ideal Stelrad Group reserve the right to vary specication without notice
Page 30
Statement added ref to commissioning process of combustion.
Page 61
New Page Added - Benchmark Commissiong & Servicing Section
Page 62 & 63
New updated Commissioning Checklist & Service Record Sheets
Page 64 & 65
New pages added, Flowchart for CO Level and Combustion Ratio Check on Commissioning a Condensing Boiler.
FOR ANY TECHNICAL QUERIES PLESE RING THE IDEAL
INSTALLER HELPLINE : 01482 498704
NOTE. BOILER RESET PROCEDURE -
To reset boiler, turn mode knob to reset position and immediately turn knob back to required setting.
The boiler will repeat the ignition sequence if a heat demand is present.
NOTES FOR THE INSTALLER

IDEAL LOGIC Combi 24 Specifications

General

Boiler Type	Combi
Output Rating	24 kW
Dimensions (H x W x D)	700 x 395 x 278 mm
Flow Rate	9.8 l/min
Fuel Type	Natural Gas
Mounting	Wall Mounted
Efficiency	94%
Central Heating Flow Temperature Range	30-80°C
Hot Water Temperature Range	30-65°C
Warranty	2 years
Energy Efficiency	A