ID TECH VP6800 User Manual
Page | 14
second
Device was tampered by physical,
temperature, or voltage attack. All sensitive
information is erased or unrecoverable.
Device blocks all sensitive function. There is no
way to recover except to return to
6.4. Tamper and Failed Self-Check Indicators
The VP6800 displays the following indicators when it has been tampered or has any of the other
following internal issues, such as an expired certificate, missing key, or similar fault discovered during
a self-check.
Note that the Tampered screen also displays configuration information used to diagnose the cause of
the issue, similar to the image below on the right:
To Next Page
Loading...
