IDTECH VP6800 - Specifications

ID TECH VP6800 User Manual
Page | 9
3. Specifications
Hardware
CPU
528 MHz application processor
Memory
256Mb SDRM, 1Gb NAND flash
Camera
5 megapixels
SAMs
2 slots
SD card slot
1 slot
Audio
3.5mm audio jack
Interface
USB, RS232, Ethernet, BLE/Wi-Fi
Power Supply
+5VDC 2A
Power Consumption
Active Power mode: 3.5w
Sleep mode: <0.5w
Physical
Length
140 mm
Width
95 mm
Depth
52.1 mm
Screen
Dimensions (in pixels)
480 (height) x 272 (width)
Luminance/Brightness
900 cd/m2
Touch Interface Type
Capacitive
Environmental
Operating Temperature
-25° C to 70° C (-13° F to 158° F), max change of 10° C per hour
Storage Temperature
-40° C to 80° C (-40° F to 176° F)
Operating Humidity
Up to 95% non-condensing
Storage Humidity
10% to 90% non-condensing, duration three months
IK Rating
IK 08
IP Rating
IP 65
Durability
MBTF
200,000 POH
MSR Swipe Durability
500,000 times
ICC Connector Reliability
500,000 times
Note: Boot-up time can vary for VP6800 readers depending on configuration; boot-up is usually
complete within 15 seconds. “Power On” is defined as the length of time from pressing the power
button to the screen displaying the ID TECH logo; “Wake Up” is defined as the length of time from
tapping the screen to the screen displaying the ID TECH logo.
Mode
Boot Up Time
Average
Maximum
Power On
7s
15s
Wake Up from Sleep Mode
0.5s
1s
Wake Up from Stop Mode
2
7s
15s
2
Stop Mode is a low-power version of Sleep Mode. It consumes less power than Sleep Mode but requires a soft
reboot to wake up from sleeping.