ID TECH VP6800 User Manual
Page | 30
9. Security Guide
The VP6800 is an unattended device. Contact your ID TECH representative or send an e-mail to
support@idtechproducts.com
if you have any questions involving the product's daily use. We
recommend you conduct daily checks of the device as follows:
• Check the tamper evidence physical seals, to make sure they are intact.
• Power on the device, check the beeper, and the display message, making sure there is no
tamper indication (see earlier chart for beeper interpretation). Also read the firmware version,
making sure the firmware version is correct.
• Check the touchpad, to make sure there is no physical overlay on the touchpad.
• Check the appearance of device, to make sure there isn’t any hole on the device or suspicious
object around the ICC card slot.
• Check the MSR (magnetic stripe) slot, to make sure there is no alteration of the device.
To Next Page
Loading...
