IEI Technology DM-F65A/R-R10 User Manual

DM-F Series Monitor
Page 60
5.1 Introduction
The touch panel controller enables analog resistive touch panels for four-wire, five-wire &
eight-wire models. The controller directly communicates with the PC system through the
touch panel communications interface. The controller design is superior in sensitivity,
accuracy, and friendly operation. The touch panel driver emulates the left mouse button
and the right mouse button functions.
The touch panel driver supports the following operating systems:
 Microsoft
®
Windows
®
versions:
o Microsoft
®
Windows
®
2000
o Microsoft
®
Windows
®
XP
o Microsoft
®
Windows
®
2003
o Microsoft
®
Windows
®
2008
o Microsoft
®
Windows
®
Vista
o Microsoft
®
Windows
®
7
o Microsoft
®
Windows
®
8
 Microsoft
®
Windows
®
CE versions:
o Microsoft
®
Windows
®
CE 4.2
o Microsoft
®
Windows
®
CE 5.0
o Microsoft
®
Windows
®
CE 6.0
 Linux Kernel 2.6
 DOS
Driver installation is described below.
5.2 RS-232 or USB Touchscreen
Before installing the driver, connect the DM-F series monitor to the motherboard. The
DM-F series monitors support touchscreen modality through a USB or an RS-232
interface connection. Decide through which interface the touchscreen is to be controlled.

IEI Technology DM-F65A/R-R10 Specifications

General

Brand	IEI Technology
Model	DM-F65A/R-R10
Category	Monitor
Language	English