DM-F Series Monitor
Page 83
WARNING:
The precautions outlined in this chapter should be strictly followed.
Failure to follow these precautions may result in permanent damage to
the DM-F Series.
B.1 Safety Precautions
Please follow the safety precautions outlined in the sections that follow:
B.1.1 General Safety Precautions
Please ensure the following safety precautions are adhered to at all times.
Follow the electrostatic precautions outlined below whenever the DM-F
Series is opened.
Make sure the power is turned off and the power cord is disconnected
whenever the DM-F Series is being installed, moved or modified.
Do not apply voltage levels that exceed the specified voltage range.
Doing so may cause fire and/or an electrical shock.
Electric shocks can occur if the DM-F Series chassis is opened when the
DM-F Series is running.
Do not drop or insert any objects into the ventilation openings of the DM-F
Series.
If considerable amounts of dust, water, or fluids enter the DM-F Series,
turn off the power supply immediately, unplug the power cord, and contact the
DM-F Series vendor.
DO NOT:
o Drop the DM-F Series against a hard surface.
o Strike or exert excessive force onto the LCD panel.
o Touch any of the LCD panels with a sharp object
o In a site where the ambient temperature exceeds the rated temperature
To Next Page
Loading...
Need help?
General
