IEI Technology prox.pad Plus User Manual

prox.pad Plus IR Access System Installer Guide
Access system programming - System Requirements
● Hub Manager Professional
TM
access control software version 7.2 or higher (part number HUBSWR includes software
installation instructions)
● LS Link PDA Software or DTD (Data Transfer Device)
PC Hardware Requirements
● IBM-compatible Pentium-class computer
● 30MB available hard disk space
● VGA monitor or better, 800 x 600 resolution recommended
● CD-ROM or DVD-ROM drive
● Mouse
Operating System List
● Windows 98
● Windows 2000
● Windows XP
Refer to our website at www.ieib.com for any changes to these specifications.
Technical Support
Service Company: To contact IEI’s Technical Support department, call 1- 800-343-9502. Questions can also be submitted through
our website at www.ieib.com. You can also download an electronic version of this manual from this site.
End User: Please contact your service company.
Page 2 of 32 Document # 6105681, Rev 1.1, D2a

IEI Technology prox.pad Plus Specifications

General

Brand	IEI Technology
Model	prox.pad Plus
Category	Locks
Language	English