prox.pad Plus IR Access System Installer Guide
Description
The prox.pad Plus IR unit is a single door access system that is programmed and managed from a personal computer using Hub
Manager Professional software (version 7.2 or higher). The prox.pad Plus IR unit is equipped with IR communications which is used
to communicate with LS Link PDA software. In addition, you can program the unit via the keypad.
The prox.pad Plus IR unit is unique in that no separate controller is needed and there is no need to run cables from a reader to a
control. The unit is self-contained and includes built in HID proximity and keypad.
Important features include:
● Managed with Hub Manager™ Professional access software
● IR Communication with PDA via LS Link PDA Software or DTD (Data Transfer Device)
● No separate control to install
● Eliminate costly reader wiring
● 2000 users per door
● 2000 event audit trail
● Integrated-HID proximity
● Card, code, card and/or code
● Locate proximity 10 ft from control
● Indoor and outdoor
● Glass mount kit
● Door monitor
● Main relay for lock
● Programmable auxiliary relay
● Local sounder for alerts
● Option for keypad programming
Page 4 of 32 Document # 6105681, Rev 1.1, D2a
To Next Page
Loading...
