2 - TECHNICAL INFORMATION KID 70
GB
2 - Pag. 15 / 16
2.6 EQUIPMENT DESCPRIPTION (optional)
AXIAL DISPLACEMENT
In order to increase the
performances and the versatility of
the bar feeder, the manufacturer
puts the equipment indicated below
at the customer's disposal.
Bar feeder-lathe guide: directs the
bar in the section between the bar
feeder and the lathe. It proves
extremely necessary when this
section exceeds 100 mm.
A 220 (“short” version)
B 470 (“long” version)
BAR FEEDER DISPLACING DEVICE: to remove the bar feeder from the lathe with an axial
displacement. This facilitates the lathe tooling and maintenance.
To Next Page
Loading...
