GB
3 - SAFETY PROCEDURES - GENERAL INFORMATION MASTER 880MP E-volution
3 - Pag. 2 / 4
3.1 GENERAL SAFETY PRESCRIPTIONS
It is of the utmost importance to read this manual carefully before
installing, using or servicing the bar feeder or performing any other work .
Constant compliance with the instructions in this manual is a guarantee of
protection against injury.
• The operator and skilled engineer must perform only their specified duties.
• Do not tamper with the safety devices for any reason whatsoever.
• Comply strictly with the work health and safety regulations issued by the relevant
authorities in the country of installation of the machine.
• IEMCA declines any liability whatsoever for injury to persons or damage to property if the
relevant safety prescriptions are disregarded.
To Next Page
Loading...
