GB
3 - SAFETY PROCEDURES - GENERAL INFORMATION MASTER 880MP E-volution
3 - Pag. 4 / 4
3.4 USE AND OPERATION - Safety
• The working area around the bar feeder must always be kept clean and uncluttered in order
to allow immediate access to the emergency devices and bar loading to be performed
without creating obstructions or danger.
• Perform the cycle starting sequence as prescribed.
• Keep hands and other parts of the body well clear of moving parts or live electrical parts.
• Remove bracelets, watches, rings and neckties.
• Whenever necessary, use strong work gloves with 5 fingers, which do not reduce the
sensitivity or power of your grip.
• Wear working shoes as well as personal protection devices provided for by the accident
prevention regulations in force in the country in which the machine is installed.
• Inform maintenance personnel of all operating anomalies that come to your attention.
• Before starting the bar feeder, make sure that there are no personnel engaged in servicing
or cleaning the machine.
3.5 BAR FEEDER MAINTENANCE - Safety
• Do not allow unauthorized persons to carry out maintenance.
• Read this manual carefully before carrying out maintenance.
• Do not lubricate, repair or adjust the bar feeder while it is running, unless expressly
indicated to do so in the manual.
• Stop the bar feeder in accordance with the prescribed methods before carrying out
lubrication or other work.
• Do use matches, lighters or torches when servicing the machine in the presence of
inflammable fluids.
• Keep spent oil in suitable containers and consign it to companies specialized in the storage
and disposal of polluting waste products.
• Do not pollute the environment.
• Use original IEMCA spare parts only.
To Next Page
Loading...
